World Aquaculture Singapore 2026

June 2-5, 2026

Singapore

ENERGY-EFFICIENT UPWELLING TECHNOLOGY TO BOOST CLIMATE RESILIENCE IN NET-PEN AQUACULTURE

Joshua Rosettani*ab, Wael Ahmedb

aFloNergia Systems Inc.

Hamilton, Ontario, Canada

Joshua.rosettani@flonergia.com

bUniversity of Guelph

Guelph, Ontario, Canada



Rising temperatures and variable water quality are increasingly affecting net-pen aquaculture, limiting feeding efficiency and reducing production yields. Upwelling systems offer a potential solution; however, existing designs are energy-intensive and their suboptimal fluid dynamics limit their ability to break thermal stratification and improve water quality. This project introduces an engineered upwelling approach using airlift pumps that consume only 10% of the energy required by conventional systems. The objective is to enhance water circulation and cool the upper layers within net-pen cages. System performance is evaluated through Computational Fluid Dynamics (CFD) simulations in ANSYS Fluent, modeling heat and mass transfer in an open net-pen environment. In the CFD setup, six 8” FloMov™ pumps are arranged around the cage perimeter, with suction pipes extending below the thermocline to draw cooler water from deeper layers to the surface. Figure 1a shows the temperature distribution along a vertical slice of the net pen, while Figure 1b illustrates the velocity vectors. After 1.5 hours of transient simulation, enhanced mixing was found to effectively lower temperatures in the upper water layers. Figure 2 displays surface temperatures at various locations, indicating a 2.7°C reduction after 1.5 hours. The next phase of the project will involve field testing this system at an Ontario net-pen facility raising rainbow trout, allowing validation of the design and evaluation of its applicability across different cage sizes and operational conditions.

Acknowledgement: The authors gratefully acknowledge the Ontario Ministry of Agriculture, Food and Agribusiness (OMAFA) for funding this research under the Ontario Agri-Food Innovation Alliance Tier I grant No. 100108. The support from FloNergia Systems Inc. for supplying the FloMovTM technology and Wahba Engineers for assisting in the CFD analysis is appreciated.